Do you have a question about the Pentax R-315EX(NX) and is the answer not in the manual?
Brand | Pentax |
---|---|
Model | R-315EX(NX) |
Category | Measuring Instruments |
Language | English |
General safety precautions to prevent injury or damage to users and the instrument.
Explains warning and caution symbols used in the manual for safety.
Specific warnings regarding laser safety, EMC, and product use.
Specific cautions regarding product handling, battery, and environment.
General usage instructions for maintaining performance and safety.
Guidelines for storage, transport, and pre-use checks.
Identifies key components of the instrument with labels.
Instructions for unpacking, packing, and lists included items.
Steps for attaching, removing, and charging the battery.
Overview of the instrument's display panel and keyboard.
Explains the functions of operational and function keys.
How to input text and use the laser pointer function.
Steps for setting up the instrument on a tripod and leveling it.
How to use and adjust the laser and optical plummet for centering.
How to level the instrument using circular and electronic vials.
Instructions for adjusting the eyepiece and sighting the target.
How to measure and reset horizontal and vertical angles.
How to hold, input, and display angles and slopes.
How to switch the horizontal angle direction from clockwise to counterclockwise.
How to select target modes and understand measurement modes.
Details on reflectorless, sheet, and quick mode measurements.
Explains "MEASURE SHOT" and "TRACK CONT" modes for distance.
How to set target constants and input temperature for correction.
How to set atmospheric pressure and ppm values for correction.
Introduction to initial settings and how to configure setting 1.
Options for initial setting 2 like measurement display and shot count.
Options for initial settings 4 (units) and 5 (communication).
How to set date/time and example of changing settings.
How to check and adjust electronic and circular vials for leveling.
How to check vertical reticle and axis perpendicularity.
How to check laser plummet, optical plummet, and EDM beam axis.
How to check vertical 0 point error and offset constant.
Lists common error messages and their meanings and solutions.
Explains atmospheric correction, unit conversion, and error tables.
Explains correction formulas and measurement range factors.
Safety compliance information regarding laser radiation.