37
Press the numeric key as 123.4520.
Press the [ENT] key to accept the
horizontal angle set to 123° 45' 20" and
change the screen to mode A.
• The former data is called by pressing the [CLEAR]
key again.
5.5 Displaying the % slope of
the vertical angle
Press [F5] [MODE] to enter mode B.
Press [F2] [ANG SET] to display the
Angle setting screen.
Press the [F5] [SELECT] to change the screen to
display the slope % of Vertical angle.
Press [F4] [DISP] to display the slope value in %.
1. ANGLE / %GRADE: ANGLE
2. H. ANGLE INPUT: 123°45’20”
3. R/L REVERSE: RIGHT
123° 45’2 0”
CLEAR
ANGLE SET
H.angle
H.dst.
V.dst.
123° 45’ 20”
MEAS TARGET 0 SET DISP MODE
MODE A 15°C S 0
H.angle
H.dst.
V.dst.
92° 30’ 20”
S.FUNC ANG SET HOLD CORR MODE
MODE B 15°C S 0
SELECT
ANGLE SET
1. ANGLE / %GRADE: ANGLE
2. H. ANGLE INPUT: 092°30’20”
3. R/L REVERSE: RIGHT
H.angle
H.dst.
V.dst.
MEAS TARGET 0 SET DISP MODE
MODE A 15°C S 0
92° 30’ 20”
H.angle
%. grade
S.dst.
MEAS TARGET 0 SET DISP MODE
MODE A 15°C S 0
92° 30’ 20”
-1.84%
1. ANGLE / %GRADE: ANGLE
2. H. ANGLE INPUT: 00°00’00”
3. R/L REVERSE: RIGHT
0 0 ° 00’00”
CLEAR
ANGLE SET
To Next Page
Loading...
