peplink 1350 User Manual

USER MANUAL
Peplink Balance Series
17.4.4 Email Settings
Once you have selected for Guest Account mode as the Captive portal modem in section 17.4.1, the
Email Settings tab will be available. Under this page, email server and templates can be set. Automatic
emails will be sent with the specified information.
Email Server / Template Settings
Sender’s Name
This is to specify the sender’s name of the email.
Sender’s Email
Address
This is to specify the sender’s email address of the email.
SMTP Server
This is to specify the SMTP server which will be used to send email. If the Server
requires authentication, check the box Require authentication.
SMTP User Name /
Password
This setting specifies the SMTP username and password while sending email. These
options are shown only if Require authentication
check box is checked in SMTP Server
setting.
http://www.peplink.com -133 / 207 - Copyright © 2013 Peplink

peplink 1350 Specifications

General

Brand	peplink
Model	1350
Category	Network Router
Language	English