peplink balance ONE - 18 Captive Portal

USER MANUAL
Peplink Balance Series
http://www.peplink.com -163 / 261 - Copyright © 2015 Peplink
18 Captive Portal
The captive portal serves as gateway that clients have to pass if they wish to access the
Internet using your router. To configure, navigate to Network>Captive Portal.
Captive Portal Settings
Enable
Check Enable and then, optionally, select the LANs/VLANs that will use the captive
portal.
Hostname
To customize the portal’s form submission and redirection URL, enter a new URL in this
field. To reset the URL to factory settings, click Default.
Access
Mode
Click Open Access to allow clients to freely access your router. Click User
Authentication to force your clients to authenticate before accessing your router.
RADIUS
Server
This authenticates your clients through a RADIUS server. After selecting this option, you
will see the following fields:
Fill in the necessary information to complete your connection to the server and enable
authentication.