peplink balance ONE - Peplink Mediafast 200;500; E.10 Peplink Mediafast 200;500

USER MANUAL
Peplink Balance Series
http://www.peplink.com -258 / 261 - Copyright © 2015 Peplink
E.10 Peplink MediaFast 200/500
WAN Support
 DHCP, PPPoE, and Static IP
 Inbound and Outbound Link Load Balance
Device Management
 Wizard & Menu Driven Web Management Interface over HTTP / HTTPS
 Remote Reporting and Management
 Bandwidth Usage Monitor
 Configurations Upload and Download
Internet Access Sharing
 SUA (Single User Account) / Multi-to-Multi NAT
 NAT supports PAT (Port Address Translation)
Security
 PPTP VPN Server
 IPsec (Network-to-Network)
 Rules-based Stateful Firewall, with IP, Protocol, and Port filtering
 SpeedFusion
TM
Bandwidth Bonding
 VPN Encryption: 256-bit AES
 Intrusion Detection System
Physical Interface
 Five RJ-45 for an IEEE 802.3ab 10/100/1000M WAN
1
 Three RJ-45 for an IEEE 802.3ab 10/100/1000M LAN /Two SFP+ for an IEEE
802.3ae 10G LAN
 One RJ-45 Console / Serial Port
 One USB for 3G/4G LTE Cellular Modem Connection
Power Specification
 AC input 100-240V
Operating Environment
 Temperature: 0°C - 40°C
 Humidity: 10% - 90% (non-condensing)
1
MediaFast 500-B WAN ports 1-5 are active by default. Load balancing and/or a
SpeedFusion license is required to activate MediaFast 500-A WAN ports 2-