This field enables you to quickly find your device if you know its name or serial number.
Fill in the field to begin searching. Partial names and serial numbers are supported.
This table displays the MAC address, IP address, firmware version, and specific
configurations of each device. Clicking the button for each device will display
the following menu:
Here, you can edit the name and location of your AP. You can also choose the channel
to transmit from. You can also batch configure devices on this table by selecting the
items you wish to configure, then clicking .
After selecting your devices you wish to configure, click to
reach the following menu:
Select the pull-down menu to choose a firmware pack for the devices that you have
selected.
After selecting your devices you wish to configure, click to
reach the following menu:
Select the pull-down menu to choose an AP profile for the devices that you have
selected.
To Next Page
Loading...
