peplink balance ONE - Page 208

USER MANUAL
Peplink Balance Series
http://www.peplink.com -208 / 261 - Copyright © 2015 Peplink
 HTTP/HTTPS
Web Admin
Port
This field is for specifying the port number on which the web admin interface can be
accessed.
Web Admin
Access
This option is for specifying the network interfaces through which the web admin interface
can be accessed:
 LAN only
 LAN/WAN
If LAN/WAN is chosen, the WAN Connection Access Settings form will be displayed.
WAN Connection Access Settings
Allowed
Source IP
Subnets
This field allows you to restrict access to the web admin to only defined IP subnets.
 Any - Allow web admin accesses from anywhere, without IP address restrictions.
 Allow access from the following IP subnets only – Restricts the ability to access
web admin to only defined IP subnets. When this option is chosen, a text input area
will appear:
Enter your allowed IP subnet addresses into this text area. Each IP subnet must be in the
form of w.x.y.z/m. w.x.y.z represents an IP address (e.g., 192.168.0.0), and m represents the
subnet mask in CIDR format, which is between 0 and 32 inclusively. For example:
192.168.0.0/24.
To define multiple subnets, separate each IP subnet, one per line. For example:
192.168.0.0/24
10.8.0.0/16
Allowed WAN
IP Address(es)
This is to choose which WAN IP address(es) the web server should listen on.