USER MANUAL
Peplink Balance Series
http://www.peplink.com -65 / 261 - Copyright © 2015 Peplink
If you are not using drop-in mode, select the connection method for the WAN connection(s)
from the following screen:
Depending on the selection of connection type, further configuration may be needed. For
example, PPPoE and static IP require additional settings for the selected WAN port.
Please refer to Section 12, Configuring the WAN Interface(s) for details on setting up
DHCP, static IP, and PPPoE.
If Mobile Internet Connection is checked, the setup wizard will move on to Operator
Settings.
If Custom Mobile Operator Settings is selected, APN parameters are required. Some
service providers may charge a fee for connecting to a different APN. Please consult
your service provider for the correct settings.
To Next Page
Loading...
