USER MANUAL
Peplink Balance Series
http://www.peplink.com -90 / 261 - Copyright © 2015 Peplink
Check this box to turn on DHCP relay.
Enter the IP addresses of one or two DHCP servers in the provided fields. The DHCP
servers entered here will receive relayed DHCP requests from the LAN. For active-passive
DHCP server configurations, enter active and passive DHCP server relay IP addresses in
DHCP Server 1 and DHCP Server 2.
DCHP Option 82 includes device information as relay agent for the attached client when
forwarding DHCP requests from client to server. This option also embeds the device’s MAC
address and network name in circuit and remote IDs. Check this box to enable DHCP
Option 82.
Once DHCP is set up, press “Save” and configure LAN Physical Settings, Static
Route Settings, WINS Server Settings, DNS Proxy Settings, and Bonjour
Forwarding as noted above.
To Next Page
Loading...
