peplink balance ONE - Page 93

USER MANUAL
Peplink Balance Series
http://www.peplink.com -93 / 261 - Copyright © 2015 Peplink
The following diagram illustrates:
Important Note
Starting from Firmware version 5.0, drop-in mode can be configured on any WAN port. Please note that only one
WAN port can be configured in drop-in mode. If you have selected the LAN bypass port as the WAN for drop-in
mode, the high availability feature will be DISABLED automatically.
Tip
Want to know more about drop-in mode? Visit our YouTube Channel for video tutorials!
http://youtu.be/lZG2-VPml5w