peplink balance ONE

To Next Page

To Previous Page

USER MANUAL

Peplink Balance Series

12.2.2 Static IP Connection

The static IP connection method is suitable if your ISP provides a static IP address to

connect directly.

Static IP Settings

IP Address /

Subnet Mask /

Default

Gateway

These settings specify the information required in order to communicate on the Internet

via a fixed Internet IP address.

The information is typically determined by and can be obtained from your ISP.

DNS Servers

Each ISP may provide a set of DNS servers for DNS lookups. This field specifies the

DNS (Domain Name System) servers to be used when a DNS lookup is routed through

this connection.

You can input the ISP-provided DNS server addresses into the DNS server 1 and DNS

server 2 fields. If no address is entered here, this link will not be used for DNS lookups.

Please refer to Sections 0, 12.3, 12.4, and 12.5 for details about WAN Health Check,

Bandwidth Allowance Monitor, Additional Public IP Settings, and Dynamic DNS

Settings.

peplink balance ONE - Page 98