Enter a name to represent this profile. The name can be any combination of
alphanumeric characters (0-9, A-Z, a-z), underscores (_), dashes (-), and/or
non-leading/trailing spaces ( ).
Check this box to enable PepVPN.
By default, VPN traffic is encrypted with 256-bit AES. If Off is selected on both ends of
a VPN connection, no encryption will be applied.
Select Remote ID / Pre-shared Key to specify the method your access point will use to
authenticate peers. When selecting Remote ID / Pre-shared Key, be sure to enter a
unique peer ID number in the Remote ID field.
Remote ID /
Pre-shared Key
This optional field becomes available when Remote ID / Pre-shared Key is selected as
the Pepwave access point’s VPN Authentication method, as explained above.
Pre-shared Key defines the pre-shared key used for this particular VPN connection.
The VPN connection's session key will be further protected by the pre-shared key. The
To Next Page
Loading...
Need help?
General