peplink SD - Port List

Speed
Select ports speeds 10 or 100 Mbps half or
full Duplex or 1 Gbps full Duplex.
Port Type
Trunk or Access port
VLAN
All or CUSTOM (select 1 or more existing
VLANs)
Accept Frame Type
Frame Types the port accepts (VLAN tagged
only, or All)
RSTP
Enable or disable RSTP (Rapid Spanning
Tree Protocol)
Notes
Add additional notes
LACP
Link Aggregation
Configurable options on port 25 and 26 (fibre) are similar as above; but configurable port
speeds are between 100 Mbps Full Duplex up to 10 Gbps Full Duplex.
Port List
The port list can be shown or hidden by clicking on the show/hide button under the ports.