peplink SD - Standalone menu options > System > InControl

SNMPv3 User Settings
User Name
This setting specifies a user name to be used
in SNMPv3.
Authentication Protocol
This setting specifies via a drop-down menu
one of the following valid authentication
Protocols:
● NONE
● MD5
● SHA
When MD5 or SHA is selected, an entry field
will appear for the password.
Privacy protocol
This setting specifies via a drop-down menu
one of the following valid privacy
Protocols:
● NONE
● DES
When DES is selected, an entry field will
appear for the password.
Standalone menu options > System > InControl
InControl is a cloud-based service which allows you to manage all of your Peplink and
Pepwave devices with one unified system. With it, you can generate reports, gather
statistics, and configure your devices automatically. All of this is now possible with
InControl.