This field shows the router name defined at System>Admin Security
This option specifies the port which SNMP will use. The default port is
161.
This option allows you to enable SNMP version 1.
This option allows you to enable SNMP version 2.
This option allows you to enable SNMP version 3.
To add a community for either SNMPv1 or SNMPv2, click the Add SNMP Community
button in the Community Name table, upon which the following screen is displayed:
This setting specifies the SNMP community
name.
Allowed Source Subnet Address
This setting specifies a subnet from which
access to the SNMP server is allowed. Enter
subnet address here (e.g., 192.168.1.0) and
select the appropriate subnet mask
To define a username for SNMPv3, click Add SNMP User in the SNMPv3 User Name
table, upon which the following screen is displayed:
To Next Page
Loading...