0 hours 0 minutes signifies an unlimited
session time. This setting should be used
only in special situations as it will lower the
system security level if users do not logout
before closing the browser.
The default setting is 4 hours 0 minutes
HTTP / HTTPS sessions or both are allowed
to connect to the web admin interface.
Port to connect to the web admin interface
(default port is 80 for HTTP and 443 for
HTTPS).
Access only allowed through Management
Port, or through the Management port and a
specific VLAN.
When this option is enabled, the web admin will authenticate using an external RADIUS server.
Authenticated users are treated as "admin" users with full read-write permission. Local "admin"
and "user" accounts will be disabled.
However, when the device fails to communicate with the RADIUS server, local accounts are
enabled to allow emergency access.
The Authentication Protocols supported are MS-CHAPv2 and PAP.
Management Port Settings
To Next Page
Loading...