VBP-HH1-V3.0*
Safety
2013-06
5
2Safety
2.1 Used Symbols
Safety-relevant Symbols
Informative Symbols
Action
This symbol indicates a paragraph with instructions.
2.2 General safety instructions
Installation and commissioning of all devices must be performed by a trained
professional only.
This device is approved for use in environments with controlled electromagnetic
compatibility (EMC) according to IEC 61326-1. Jammers, such as mobile phones
can not be operated in close proximity.
Protection of operating personnel and the system is not ensured if the product is
not used in accordance with its intended purpose.
On ly use reco mmen ded original accessories.
User modification and or repair are dangerous and will void the warranty and
exclude the manufacturer from any liability. If serious faults occur, stop using the
device. Secure the device against inadvertent operation. In the event of repairs,
return the device to your local Pepperl+Fuchs representative or sales office.
When packing the device for storage or transport, use materials that will protect
the device from bumps and impacts and protect against moisture. The original
packaging provides the best protection. Also take into account the permitted
ambient conditions.
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt devices and any connected facilities or systems,
or result in their co mplete fa ilure.
Note!
This symbol brings important information to your attention.
To Next Page
Loading...
Need help?
General