31
WARNING: The cell used in this device may present a risk of re or chemical burn
hazard if mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or incinerate.
Replace cell with a CR123A only, or Percussionaire part PRT-B13350.
Use of another cell may present a risk of re or explosion.
Dispose of in accordance with appropriate regulations, country, local
and state laws.
Chapter 8: Cleaning and Disinfection
Controller and Stand
Percussionaire® Digital Multimeter (PDM)
CAUTION Do not spray any cleaning solution onto the controller or stand.
CAUTION Do not immerse or allow liquids to access the controller.
Clean the controller and stand according to hospital/institutional protocols.
Always clean between patients, and when visibly soiled. Clean the controller and stand
with a clean, lint-free cloth or paper towel moistened with the cleaner.
CAUTION Use only approved cleaners.
Clean the PDM when visibly soiled or according to facility protocols. Do not spray
any type of cleaner directly onto the PDM. Clean the glass with a product or chemical
approved for cleaning glass only.
CAUTION Use of cleaning methods not outlined in these instructions may cause
damage to the PDM.
To Next Page
Loading...
