Operating Instructions
Page 4
RevA
1. Introduction
The Shearwater Perdix AI is an advanced dive computer for
all types of diving� The Air Integration (AI) feature adds the
ability to wireless monitor the pressure of one or two scuba
tanks�
This manual only covers operation of the AI feature� Please
see the Perdix manual for full operating instructions of the
dive computer features�
Please take the time to read this manual� Your safety may
depend on your ability to read and understand the AI displays�
Do not use this manual as a substitute for proper dive training
and never dive beyond your training� What you don’t know
can hurt you�
1.1. Features
• Wireless pressure monitoring of 1 or 2 scuba tanks�
• Units in PSI or Bar�
• Flexible display setup�
• Optional Gas Time Remaining (GTR) and Surface Air
Consumption (SAC) rate based on one of the tanks�
• Logging of pressure, GTR, and SAC values at 10
second intervals�
• Average SAC of last dive displayed on surface�
• Warnings when reserve and critical pressures reached�
• Available in all modes (OC Rec, OC Tec, CC/BO, and
Gauge)
Use a backup analog SPG
Always use a backup analog
submersible pressure gauge as a
redundant source of gas pressure
information�
FIGURE 1 The Perdix AI transmitter and handset
To Next Page
Loading...