Peri MULTIFLEX - Formlining; Static Values Overview

26
1100 0 11
21 8560/6610 15.0/12.4
20 7500/5760 13.0/10.5
19 / ¾” 6180/6880 12.0/11.5
18 8730/6440 15.3/12.2
21 8560/6610 15.0/12.4
19 / ¾” 9170/7060 15.7/13.6
21 7000/4130 8.3/6.3
27 8000/1070 4.9/1.5
21 8000/1070 5.9/1.3
21 7910/3710 8.0/5.0
Formlining
Overview, Static Values
Plywood
The statical/mechanical values given in
the table refer, according to information
from the manufacturers, to a moisture
content of 15%.
But the GSV stipulate the values of
moisture content as 20%. The values
for the E-Modulus are therefore to be
reduced by a factor of 0.9167 and the
values for the permissible stress by a
factor of 0.875.
The fibres of the face veneer span in
the direction of the first length shown
for the plywood size.
The permissible value according to
DIN 1052 results in short for Application
Class 2 with load duration.
Solid Timber
Conifer Timber, Sorting Class C24
E-Modulus [N/mm
2
]
parallel
Perm. [N/mm²]
parallel
Type of plywood Thickness [mm] Veneers E-Modulus [N/mm²]
parallel/cross
Perm.
[N/mm²]
parallel/cross
Fin-Ply
Fin-Ply, Maxi
Fin-Ply, USA
Fin-Ply
PERI Birch
PERI Birch, USA
PERI Spruce 400
3-Ply Plywood
3-Ply Plywood
FinNa-Ply
Birch
Birch
Birch
Birch
Birch
Birch
Conifer Timber
Spruce
Spruce
Conifer Timber