Peri MULTIFLEX - PEP 10 Prop Loads

39
PEP 10-250 A
L = 1.47 – 2.50 m
PEP 10-300 A
L = 1.72 – 3.00 m
PEP 10-350 A
L = 1.97 – 3.50 m
PEP 10-400 A
L = 2.22 – 4.00 m
1.50 25.0
1.60 25.0
1.70 25.0
1.80 23.1 25.0
1.90 20.8 24.9
2.00 18.8 22.5 25.0
2.10 17.0 20.4 23.8
2.20 15.5 18.6 21.7
2.30 14.2 17.0 19.8 22.7
2.40 13.0 15.6 18.2 20.8
2.50 12.0 14.4 16.8 19.2
2.60 13.3 15.5 17.8
2.70 12.3 14.4 16.5
2.80 11.5 13.4 15.3
2.90 10.7 12.5 14.3
3.00 10.0 11.7 13.3
3.10 10.9 12.5
3.20 10.3 11.7
3.30 9.6 11.0
3.40 9.1 10.4
3.50 8.6 9.8
3.60 9.3
3.70 8.8
3.80 8.3
3.90 7. 9
4.00 7. 5
Slab Props
PEP 10
Permissible Prop Load [kN]
Extension
Length [m]
Note:
Q
PERI PEP 10-250 A, PEP 10-300 A, PEP 10-350 A and
PEP 10-400 props fulfil Prop Class A load-bearing capacity
requirements of DIN EN 1065.
Q
The permissible values are valid when using the bottom
outer and inner tubes.