Installation 25
Tube line installation for Lambda 265 and 465
1. Assemble one of the flangeless fittings in the union and ferrule kit and connect it to
the tube of the autosampler probe.
2. Prepare the tube connection components and assemble each component one by one.
Connection A: Assemble the other flangeless fittings in the autosampler union and
ferrule kit to the tube of the flow cell inlet and connect it to the union of autosampler
probe.
Connection B: Connect the outlet tube of the flow cell to the conical adapter, and
to the peristaltic pump tube.
To Next Page
Loading...
Need help?
General
