6 . Lambda 265, 365 and 465 ASX-260/280 AND ASX-520/560 Autosampler Users Guide
Features
The ASX 260/280 and ASX-520/560 autosamplers are designed to be study, reliable and easy
to use. They provide automated sample introduction that enables you to perform other tasks
while the Auto Sampler runs.
The ASX 260/280 and ASX-520/560 automatically introduces up to 180 and 360 samples
each when fully loaded. It contains a microprocessor that allows sequential or random
sampling, providing flexibility.
The components of autosampler are made of corrosion-resistant stainless steel alloys or
anodized aluminum. The enclosure and base are made from a high-strength aluminum alloy
that is chromated and finished with an epoxy powder coating.
The autosampler operates reliably under a wide variety of conditions. Components in the
sample flow path are made of polyetherimide (PEI) and polytetrafluoroethylene (PTFE).
When these inert, non-metallic materials are used at temperatures less than 135 °C, they
can withstand repeated exposure to the following substances.
To Next Page
Loading...
Need help?
General
