PerkinElmer Lambda 465 User Manual

Interface Setup. 39
7. Select OK after checking the changed parameter values.
8. Launch the software.
9. If the instrument fails to communicate with the PC, change the COM Port Number
referring to the following procedures.
10. Open the Advanced Setting for COMx window, following the procedure of
Setting
USB Serial Ports
on page 36.
11. Select on the COM Port number list to expand it and change the COM port number
to another one which is not in use from COM 1 to COM 10.

PerkinElmer Lambda 465 Specifications

General

Brand	PerkinElmer
Model	Lambda 465
Category	Measuring Instruments
Language	English