60 . Lambda 265, 365 and 465 ASX-260/280 AND ASX-520/560 Autosampler Users Guide
7. Select the Auto sampler model. Click OK.
8. The Autosampler setup box will be shown. Set each parameter according to the
experiment conditions.
1) Auto Sampler Setting
▶ Sample Rack Type
The following different types are available. Select the desired sample rack type.
1) 30 mm tubes (3 x 7 Positions)
2) 25 mm tubes (3 x 8 Positions)
3) 20 mm tubes (4 x 10 Position)
4) 15 mm tubes (5 x 12 Position)
5) 13 mm tubes (6 x 15 Position)