Illustration 19 g01156733
This typical example of a label is installed on engines that have mechanical fuel injection pumps.
Label for engines that comply with
MSHA emissions
Illustration 20 g01381316
Typical example
The label that is shown in illustration 20 is for
engines that operate in underground coal mines in
North America. The label is installed on engines that
comply with the Mine Safety and Health
Administration (MSHA) emissions. Approved diesel
engines shall be identified by an approved mark that
is legible and permanent. The approved mark is
scribed with the approved MSHA number. The label
should be securely attached to the diesel engine.
SEBU7833 21
Product Identification Information
Emissions Certification Film
To Next Page
Loading...
