www.bringperlickhome.com
11
DOOR REVERSING
All Perlick Residential Refrigerated Cabinets
come equipped with field reversible left or right
hand opening door capabilities. Refer to DOOR
REVERSING ILLUSTRATIONS on pages 13-14.
To reverse the opening of the door remove the
top pivot pin from the upper cabinet hinge
bracket. Pull the top pivot pin out of door hinge
bracket and remove the door by tilting forward
and lifting off bottom hinge pin. Re-install pivot
pin in top hinge. Remove cabinet hinge screw
hole plugs (3 each, top and bottom) from new
hinge location. Do not discard. Remove the
bottom cabinet hinge bracket (3 screws).
Remove lower cabinet hinge bracket (3 screws).
Remove door closer insert from the lower
cabinet hinge bracket and install on new bottom
hinge bracket (old top hinge bracket). Install
new bottom cabinet hinge bracket at new bottom
hinge location. Install new top cabinet hinge
bracket at new top hinge location. Remove
upper and lower door hinge brackets from door
(3 screws each). Remove door closer insert
from lower door hinge bracket and install on new
lower door hinge bracket (old top door hinge
bracket). Rotate the door 180 so handle is on
new opening side (Old bottom of door is new top
of door). Install new lower door hinge bracket to
bottom of door (3 screws). Install new upper
door hinge bracket to top of door (3 screws).
Remove top pivot pin from the upper cabinet
hinge bracket. To re-install the door, slide lower
door hinge bracket onto lower pivot pin. Tilt top
of door into position aligned with top cabinet
hinge bracket and install top pivot pin (tighten
securely). Install cabinet hinge screw hole plugs
removed earlier in open hinge holes (3 each, top
and bottom)
To Next Page
Loading...
