EasyManua.ls Logo

Perlick Residential Refrigeration - Installation Instructions

Perlick Residential Refrigeration
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.bringperlickhome.com
4
ILLUSTRATION 1. INSTALLATION SPECIFICATIONS
150° max swing
on inner doors of
a multi-door unit
71 7/8"
50" Area in which electrical
outlet must be located
13 3/32"
Same for Two and
Three door units
13 1/16" same on
both sides of unit
5 3/16" minimum clearance
required if installing in a corner
*5 3/4 for custom wood overlay
door
-All electrical instructions
assume that outlet is located
4-10 inches from floor
-Floor must be level in area of
installation, leg levelers are meant
as a means of fine tuning, not
recommended for making up
differences in the floor surpassing
1/2 inch
-When moving the units into place
take care to protect the floor as
necessary with cardboard, rugs, etc.
-Never attempt to move unit without
at least one other person present
-Always secure doors shut prior to
moving the unit
Finished rough opening requirements
*Height-----------------34 1/2 inches
*Depth------------------24 inches
*same across all units
One door width------24 inches
Two door width------48 inches
Three door width----72 inches
NOTE:
34 3/32"
105° max swing
for custom wood overlay
doors
47 7/8"
50" Area in which electrical
outlet must be located
Top View
Three Door
Top View
Two Door
recommended minimum swing.
Max swing is 175° on single door
and end cabinets on multi-door units
22 3/4"
50" Area in which electrical outlet
must be located
23 7/8"
100°
25" Min Clearance
for door swing
Top View
Single Door

Table of Contents

Related product manuals