Name: PEUGEOT Satelis 500
Brand: PEUGEOT
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SERVICE OPERATIONS

Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles

- Lubricate the rubber seal of a new oil filter.

- Using a facom D155 type oil filter notched

cap wrench, install the oil filter.

Tightening torque: 1.4 m.daN.

- Fit the drain plug.

Tightening torque: 2.5 m.daN.

- Fill the engine with 1.7 L motor oil through

the filler hole.

- Fit the filler cap.

- Start the engine, let it run for a few minutes

and then stop it.

- Remove the filler cap and wipe up the oil.

- Fit and screw the cap home.

- Remove the engine's oil filler cap.

- Check the oil level by using the marks on the

filler cap.

A. Oil level high.

B. Oil level low.

- Add oil if necessaire.

Note: Check the level with the machine par-

ked on its centre stand, on level

ground.

 Draining the relay box.

- Remove the relay box filler cap. (1)

Other manuals for PEUGEOT Satelis 500

Questions and Answers:

Need help?

Do you have a question about the PEUGEOT Satelis 500 and is the answer not in the manual?

General