8 - 4
Mounting and commissioning the machine
Fig. 8 - 05
8.01.06 Mounting the spool holder
● Mount the spool holder as shown in
Fig. 8 - 05.
● Insert spool holder in the table-top hole
and fasten it by means of the included
nuts.
8.01.07 Mounting the sewing lamp
▲
● Screw the sewing lamp onto the table top (wood screws 5x35) and have it connected by
a specialist.
▲
The sewing lamp is not included in the normal delivery package.
To Next Page
Loading...
