Pfaff 1245

To Next Page

To Previous Page

Adjustment

11 - 33

● In this position and taking care to ensure that there is no horizontal play, tighten screw 1.

Main Page

Instruction Manual1
Specifications2
Table of Contents3
Safety6
Directives6
General Notes on Safety6
Safety Symbols7
Important Points for the User7
Operating and Specialist Personnel8
Operating Personnel8
Specialist Personnel8
Danger9
Proper Use11
- Specifications12
- Max. Number of Stitches/Min13
- Disposal of the Machine16
Transport Packaging and Storage17
Transport to the Customer17
Transport Within the Customer's Premises17
Disposal of the Packaging17
Storage17
Explanation of the Symbols18
Controls19
Mounting and Commissioning the Machine23
Mounting23
Adjusting the Table-Top Height23
Adjusting the V-Belt Tension24
Mounting the Upper V-Belt Guard24
Mounting the Lower V-Belt Guard25
Mounting Tilt-Over Safeguard25
Mounting the Spool Holder26
Mounting the Sewing Lamp26
- Table Top Cutout27
Pfaff 124527
Pfaff 124628
Commissioning the Machine29
Switching the Machine On/Off29
- Preparation30
Removing/Threading the Bobbin Case33
General Lubrication36
Checking the Air Pressure36
Adjustment41
Positioning the Feed Dog Across the Direction of Sewing42
Positioning the Feed Dog in the Direction of Sewing43
Height of the Bottom Feed-Dog44
Pre-Adjusting the Needle Height45
Centering the Needle in the Needle Hole46
Lifting Motion of the Bottom Feed-Dog47
Driving Motion of the Bottom and Top Feeds48
Hook-To-Needle Clearance, Needle Rise, Needle Height and Needle Guard49
Top-Feed Stroke51
Lifting Motion of the Top Feed52
Bobbin-Case Opener53
Safety Clutch54
Needle Thread Tension Release55
Thread Check Spring56
Thread Check Spring on PFAFF 1246 with Thread Trimmer -900/5657
Bobbin Winder58
Presser-Foot Pressure59
Pre-Adjusting the Control Cam60
Tripping Lever61
Pawl62
Engaging Solenoid63
Release Trip64
Engaging Lever65
Linkage Rod66
Final Adjustment of the Control Cam67
Catch68
Connecting Rod (for PFAFF 1246 Only)69
Thread-Catcher Height70
Knife71
Thread Catcher Reverse Position72
Bobbin-Thread Clamp Spring74
Tension Release Bar76
Positioner78
Wearing Parts79

Table of Contents

Related product manuals