1616
Threading the thread guides
Place the spools on the spool pins 35. You
will fi nd information on the thread net,
thread unreeling disc, spool disc and cone
thread adapter on pages 9 and 10. Thread
through the thread guides 31 from the back
to the front following the colored threading
paths.
Lift the carry handle 3 upwards. Thread
through the underside of the carrying handle
and through the rear thread guides 44 using
both hands to pull the thread down until
it slips under the thread guide. Guide the
thread through the tension discs and pull it
down until it is positioned fi rmly between
the tension discs. Return the carrying handle
to its original position.
Note:
Thread in a sequence of 1 to 5.
To Next Page
Loading...
Need help?
General
