6262
Changing the light bulb
Switch off the electrical power
Using the screw driver in the accessory
box loosen the fastening screw to the
sewing light cover 16 until the cover can be
removed.
Push the light bulb fully into its socket.
Rotate counter clockwise through half a turn
and remove.
Guide the new light bulb (max. 15 W) into
the socket and twist until both pins on the
bulb click into place. Press the bulb right into
the socket, twisting it clockwise until it is
securely fi xed.
Replace the sewing light cover and tighten
the fastening screw.
To Next Page
Loading...
Need help?
General
