6060
Machine maintenance
Cleaning the machine
Switch off the electrical power
Remove the waste container and open the
looper cover and swivel plate. Disengage the
upper blade (see page 30) and remove the
presser foot and the needle plate.
Use the accessory brush provided to remove
any waste thread from the upper and lower
blades, the differential feed and the looper
area.
Lubricating the machine
Switch off the electrical power
Move the upper overedge looper into its
highest position. Lubricate the points shown
above with the oil provided (located in the
accessory box) every time you clean the
machine. One or two drops of PFAFF sewing
machine oil are suffi cient. All other parts are
manufactured from special materials and do
not require any lubrication.
Cleaning the rubber feet
Clean the rubber feet from time to time with
alcohol. This ensures good stability.
To Next Page
Loading...
Need help?
General
