2727
Needle threader
Move the needle(s) into the highest position
and lower the presser foot. Place the thread
from right to left in notch A of the needle
threader (to be found in the accessory
box). One of the two triangles must point
upwards.
Place the needle threader onto the front
groove of the needle. Slide the needle
threader down to the needle eye and press it
lightly against the needle.
A small metal pin is pushed through the
needle eye and the needle is automatically
threaded. Thread loops must be pulled to
the back.
To Next Page
Loading...
Need help?
General
