EasyManuals Logo

Pfaff coverlock 4852 User Manual

Pfaff coverlock 4852
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
4747
2. If sewing on a tubular item, i.e. pant or
sleeve hem:
Sew around tubular item, oversewing 4-5
stitches at the beginning of your seam ’ After
the last stitch, turn the hand wheel towards
you until the needles pierce the fabric
and you have heard each needle ”click”
(just before the needles are in the lowest
position).
Edge guide
Push the edge guide (included in your
accessory box) into the guide holder A
from the left. The edge guide can be set as
required by sliding it to the left or right.
After the second ”click” tum the handwheel
away from you until the needles are in their
highest position. Raise the presser foot (this
will release the tension on the threads). Hold
the threads tightly at the end of the seam
and pull the fabric from the machine. Cut the
threads. Pull the threads through to the back
of the fabric and knot them.
The edge guide is useful for serging searm
at regular intervals with the cover stitch or
two thread chainstitch.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pfaff coverlock 4852 and is the answer not in the manual?

Pfaff coverlock 4852 Specifications

General IconGeneral
BrandPfaff
Modelcoverlock 4852
CategorySewing Machine
LanguageEnglish

Related product manuals