2-6
Presser foot lift
Use the presser foot lifter (57) to raise or
lower the presser foot. If you push the
lifter one step up, you will be able to raise
the presser foot to its maximum height of
6.5 mm for particularly thick fabrics.
Note: Once a thread chain has
been formed, the presser foot
no longer needs to be raised as
long as you are working with
the same thread and the same
presser foot. You can simply lift
the front of the presser foot
gently with your thumb. Slide
the fabric under the raised
part of the presser foot. When
the foot control is activated,
the fabric will then be gripped
and advanced by the feed dog
automatically.
Hand wheel
When turning the hand wheel (56) by
hand, e.g. to raise the needle(s) to their
highest position, always turn toward you.
To Next Page
Loading...
