1-4
3
4
5
2
1
Technical part
Safety Instructions 1-3
How to use this instruction manual 1-6
Parts of creative 4874 1-10
Summary of stitch programs for the creative 4874 1-13
Technical section, general
Machine cover 2-2
Electrical connection 2-2
Connect the foot control 2-2
Power switch 2-2
Swivel table 2-3
Trim catcher 2-3
Front cover 2-3
Detachable thread stand 2-4
Thread stand 2-4
Thread guide slide 2-4
Foam pads/Cone holders 2-5
Thread run-off disc 2-5
Spool net 2-5
Detachable thread guide 2-5
Hand wheel 2-6
Presser foot lift 2-6
Presser foot 2-7
Changing the presser foot 2-7
Needle position 2-8
Changing a needle 2-9
Threading (stitch programs 01-20) 2-10 - 2-17
Thread guides 2-10
Threading the needle(s) 2-18 - 2-19
Important note on threading 2-20
Changing spools with the machine threaded 2-20
Needle threader 2-21
Summary of threading paths and
threading sequences 2-22
Speed control 2-25
Presser foot pressure 2-25
Thread cutter 2-26
Check spring for edging the thread chain 2-26
Disengage the upper knife 2-27
Engage the upper knife 2-27
Stitch fi nger 2-28
Attach converter 2-29
Disengage the upper looper 2-30
Remove knife guard 2-31
Set seam width 2-32
Setting the stitch length 2-33
Differential feed 2-34
Electronic functions
Set language 3-2
LCD Display 3-2
Button functions 3-4
Save 3-5
Recalling the memory 3-5
Selecting a memory 3-5
Notes on the saving to memory 3-6
Deleting all memories 3-6
Changing settings for tension, stitch length and
differential feed directly without saving 3-7
Error 3-7
Cover stitch
Switching the machine to cover stitch
(progs. 01, 02, 03) 4-2
Threading the cover-stitch looper 4-4
Threading the needle(s) 4-6
Summary of threading paths and their threading
sequences 4-7
Important notes on sewing with the cover stitch 4-7
Sewing table 4-7
Starting to sew 4-8
Preparing the project 4-8
Stopping sewing 4-8
Ruler 4-9
Stitch formation 4-10
Top Cover Stitch
Sewing program sticker 5-2
Detachable thread guide for top/deco cover 5-2
Detachable thread stand 5-2
Stitch program selection 5-3
Top/deco switch lever 5-3
Accessories 5-5
Top cover hook 5-5
Top cover round thread guide 5-6
Top cover triangle thread guide 5-6
Threading the cover-stitch looper 5-7
Table of contents