Pfaff creative 4874

2-8
Needle position
The 4874 offers a choice of 5 needle
positions. You can sew with as many as
3 needles simultaneously. The needle
positions are L0, L1, L2, R1 and R2. A
retaining screw is provided above each
needle.
In this operator’s manual and in the LCD
display (9) (see page 3-2), the different
needle positions are shown in a schematic
diagram. See the examples at top and
bottom. Insert the needle(s) as shown in
the LCD display (9) (see page 3-2).
Note: If the needles are
inserted at R2 and R1, the left
needle is slightly higher than
the right.
If the needles are inserted at L1 and L2, the
left needle is slightly lower than the right.
If the needles are inserted at L0 and L2, the
left needle is also lower than the right.
If the needles are inserted at L0, L1 and L2,
the left needle is at the lowest point.
R1
R2
L1
L2
L0