4-4
A F
Set the standard presser foot heel to A
or insert the clearview foot F from the
accessory box.
When you press the memory selection
button P once, the program memory
opens. The thread tension settings appear
beside the program number in the display.
First thread the purple thread tension for
the cover-stitch looper, followed by the
blue, green and red thread tensions for the
needles.
You can also refer to the threading
diagram behind the front cover.
Threading the cover-stitch looper
Turn the hand wheel towards you until the
cover-stitch looper (33) is as far to the right
as possible.
Thread the thread in order from 1 to 10.
Thread guide 8 is marked with a purple
square
1
2
3
4
5
6
7
8
9
10
33
To Next Page
Loading...
