5-13
Top Cover Stitch
Stopping sewing
1. If you are sewing to the edge of the
project:
Grasp the threads at the end of the
seam and sew slowly off the project.
As you do so, pull the threads gently
backwards.
2. If you are sewing a continuous hem
(around a project):
Sew 4–5 stitches over the previous
stitches. On the last stitch, turn the
hand wheel towards you slowly until
the needles reach their lowest position.
Now turn the hand wheel back until
the needles are in their highest
position. At the same time, loosen the
needle threads slightly with one fi nger.
Raise the presser foot. Grasp the threads at
the end of the seam and press the tension
release button to pull the work piece out.
Cut the threads off. Pull the top cover
threads through to the wrong side of the
fabric and tie off.
To Next Page
Loading...
Need help?
General
