5-10
Threading the top cover thread
Place the spool on the front left spool pin
of the detachable thread stand. Thread the
corresponding thread guide from the back
forwards.
With both hands, pull the thread between
the tension discs and place it under the
rear thread guide (46).
Now feed the thread into the hole in the
detachable thread guide.
Top cover thread tension, blue
Set the top cover thread tension, blue (45)
as indicated on the stitch program sticker.
To do this, turn the thread tension dial
by hand until the corresponding setting
appears directly above line A.
A
To Next Page
Loading...
