2-19
Technical section, general
Exception:
Threading needle L2 when sewing the
5-thread safety seam (prog. 20), the 4-
thread safety seam (prog. 19) and double
chainstitch (prog. 04)
Thread the thread in order from 1 to 9.
The thread must pass through the upper
slot in thread guide 5.
Pull the thread about 10 cm (5”) through
the eye of the needle and place it facing
to the left under the presser foot (if
necessary, press the tension release button
(10), see page 3-4).
1
2
3
4
5
6
7
8
9
4
5
Note: To thread the double
chainstitch (prog. 04) you have
to thread the green tension
(see page 2-22).
7
8
9
To Next Page
Loading...
