6-8
Press lever A up and hook the thread into
slot B. The illustration below shows how to
do this.
Note: In the case of thread
guides 6 and 7, the thread is
simply placed on top of them,
not threaded through.
From the front, pass the thread through
eye C (- threading point 10) of the double
chain stitch and cover stitch looper.
Note: The lever will return to
its original position as soon as
you start to sew.
Thread the thread in the guides from 1
to 8. (Make sure the thread does not pass
under the latch.)
Thread the threads in order from 1 to 10.
Thread guide 8 is marked with a purple
square.
4
5
6
7
8
1
2
4
5
6
7
9
8
10
3
B
A
To Next Page
Loading...
