Pfaff creative 7560

Switch off
the
master
switch.
Hold the hook
cover (49) at the
side and open
it
towards
the front.
Lift
the latch of the
bobbin case and
pull the
bobbin case
out. Release
the latch and take out
the
empty
bobbin.
To
obtain
optimum seam
appearance
and
durability, make sure needle
and
bobbin thread tensions
are
correctly adjusted
to each other; i.e. the
threads
are
interlaced between the
two
fabric
layers.
For
ornamental seams and
buttonholes, the thread
interlace
should
be
visible on the
reverse side
of
the
fabric.
To correct the
bobbin thread
tension turn
the
adjusting
screw very slightly
to
the right,
using your
finger,
i.e. turn it to
the left
to
loosen,
or
turn
it
to the right to
tighten.
Hook cover
Taking out
the bobbin
case
Thread
tension
21