Pfaff creative 7560 - Embroidering Small Pieces of Fabric

Embroidering
small
pieces
of
fabric
If you
want
to embroider
on
a
small
piece
of fabric
which cannot
be fitted into
the
frame, we recom
mend
using
adhesive
backing. This
backing
consists of
a cover layer
and an adhesive
layer.
(Filmoplast)
Lift up the
cover layer
slightly with
the pin
and
remove
it with your
fingers.
The adhesive
layer
is
now
revealed.
Insert
the adhesive
backing
with the
smooth
side
(=
cover
layer)
facing up in
the
hoop/frame.
Using
a pin,
carefully
perforate
the cover
layer
crosswise.
As a result,
the adhesive
backing
can
be
used
again.
Adhere
your piece
of fabric to the
adhesive
layer.
After embroidering
the
fabric,
tear away
your
fabric
piece from
the
adhesive
layer.
The
resulting
hole in
the
backing can
be
patched by
placing
a piece
of
adhesive
backing the
size of
the hole
plus /
inch
(1 cm)
underneath
the hole.
72