Pfaff creative 7560

] Attach
the piece of
leather which is to be embro
idered onto
cut-away stabilizer with a fabric glue
pen or
textile adhesive.
You can also use Filmoplast
adhesive backing
(see
page
72).
Take care to ensure
that the
leather is
stuck down
flat. On
very thick and
very stiff fabrics we recom
mend pressing the
sew slow key
(3)
before starting
to sew and,
where possible, to
enlarge the embro
— idery motif
to
avoid
needle breakage and extra
perforation holes being
made in the leather.
If the leather
is
too
thick
to be
inserted into
the
hoop/frame, only fit the fleece into the embroidery
hoop and lay the
extra
leather over the embroidery
unit
so
that it
does
not hinder the feed of the hoop
control when embroidering.
Tip:
From time to
time the sewing foot and needle
fastening screws should be tightened since
when
working with
thick materials,
the
sewing foot and
the needle
can more easily become loose.
Embroidering
leather
Now
fit the fabric with
the
cut
away stabilizer into
the embroidery
hoop/frame and click
it into
the
embroidery unit.
73