26
4-3 Oiling
Lubrication is not necessary for this machine
since the major moving parts are all made of
a specially-made oil infused metal. However,
periodically one or two drops of oil at the
oiling point shown will increase its durability.
4-2 Changing the light bulb
Let the light bulb cool down before
replacing it to avoid burning your
fingers.
When the light does not come on even
though the power switch is turned on, it is
time to change the light bulb.
1. Unplug the machine.
2. Remove the light bulb cover.
3. Change the light bulb.
4. Replace the light bulb cover.
Note: The maximum power of the light bulb
is 15W.
To Next Page
Loading...
Need help?
General
