7
1-4 Setting telescopic thread stand
Extend the telescopic thread stand to its full
height, then turn until it locks against the
stop.
How to open the side cover
Push the cover to the left to unlock and
swing the cover back away from you.
How to close the side cover
Push the cover to the right and lock into
place.
1-5 Opening and closing front
cover and side cover
How to open the front cover
Push the cover to the right as far as it will go
and pull it downwards.
How to close the front cover
Pull the cover upwards and slide to the left
until it locks.
The front cover has a safety switch and the
machine will not sew when the front cover is
not closed all the way.
To Next Page
Loading...
Need help?
General
