Pfaff tipmatic 6122 User Manual

B
~ c
e
a
'""
....,
iii
~
c:
F
iii
~
"tJ
iii
I!I
n::
20
Inserting the bobbin
Insert the full bobbin into the bobbin case. In
doing so, pull the thread sideways through
slot A, then under the tension plate B until it
rests in the opening (see arrow).
Check:
When you pull the thread, the bobbin must
turn clockwise.
Checking the bobbin thread tension
Hold the bobbin case by the thread and pull
the thread upwards sharply. The bobbin case
must slip downwards a little with each hand
movement.
Adjusting the setting:
Turn setting screw C to the left very slightly -
the bobb in th read tension becomes weaker.
Turn setting screw C just a l itt le to the right -
the bobbin thread tension becomes
stronger.
Inserting the bobbin case
Lift cover F and
slide the bobbin case onto the
hook pin 0 as far as it will go . Opening E of
the bobbin case must face upwards.
Check:
Pull the bobbin thread sharply. The bobbin
case must not fall out of the hook .

Pfaff tipmatic 6122 Specifications

General

Brand	Pfaff
Model	tipmatic 6122
Category	Sewing Machine
Language	English